Loading...
Available Now — 24/7 Emergency Response
Professional Mold Remediation in Augusta, Georgia
Augusta's mold remediation challenges span from the Victorian and Federal-period homes of Summerville where original construction predates modern vapor management, to the mid-century neighborhoods of Forest Hills and National Hills, to the Fort Eisenhower-adjacent housing that turns over with military relocation schedules. Edmondson Restoration provides IICRC S520-certified mold inspection, testing, and remediation throughout Augusta, deploying from Columbia in approximately 90 minutes.
✓ Veteran Owned✓ IICRC Certified✓ Insurance Approved✓ Under 1-Hour Response
Mold Remediation — Augusta, GA
Veteran OwnedFamily Owned
IICRC Certified24/7 Available
<1 Hour Response
Local & Independent
Suspect Mold? Here's What to Do Right Now
If you've found mold in your Augusta home, take these steps before our Columbia crew arrives.
✓ DO These Things
- 1.Call us at 888-742-3085 to schedule a professional mold inspection
- 2.Avoid disturbing the mold — agitation releases spores into the air
- 3.Increase ventilation in the affected area if possible (open windows)
- 4.Keep HVAC off in the affected area to prevent spreading spores
- 5.Document visible mold with photos for insurance purposes
✗ DON'T Do These Things
- 1.Don't try to clean mold yourself — improper cleanup spreads contamination
- 2.Don't use bleach on mold — it doesn't kill mold on porous surfaces and creates toxic fumes
- 3.Don't paint over mold — it grows right through paint
- 4.Don't ignore musty smells — hidden mold may be behind walls or under flooring
- 5.Don't delay action — mold spreads rapidly and health risks increase with exposure
Our Mold Remediation Process
1
Professional Mold Inspection
Our certified technicians perform a comprehensive inspection using moisture meters, thermal imaging, and visual assessment to identify all mold-affected areas.
2
Mold Testing & Lab Analysis
Air quality and surface samples are collected and sent to an independent lab. Results identify mold species, concentration levels, and guide our remediation approach.
3
Containment & Air Filtration
We isolate affected areas with plastic sheeting and negative air pressure to prevent spore spread. HEPA air scrubbers filter airborne mold spores continuously.
4
Mold Removal & Treatment
Mold-affected materials are carefully removed following IICRC protocols. Remaining surfaces are treated with professional-grade antimicrobial solutions.
5
Cleaning & HEPA Vacuuming
All surfaces in the contained area are thoroughly cleaned and HEPA vacuumed. Air quality testing confirms successful remediation.
6
Restoration & Prevention
We repair or replace removed materials and address the moisture source that caused mold growth to prevent recurrence.
Why Augusta Homeowners Choose Edmondson for Mold Remediation
Veteran Owned & Operated
Military thoroughness ensures every trace of mold is found and eliminated. We don't cut corners on your family's health.
Professional Testing
Independent lab testing identifies mold species and concentration. We don't guess — we verify with science.
Local & Independent
Not a corporate franchise based in Atlanta. A family-owned company that knows the CSRA, Augusta's historic neighborhoods, and the Savannah River's influence on local moisture conditions.
Insurance Assistance
We document mold damage thoroughly and work with your insurance company to maximize your coverage.
IICRC S520 Standard
We follow the IICRC S520 mold remediation protocol, the industry's gold standard. Our technicians are specifically trained and certified in mold, not just generally IICRC certified.
Remediation Through Rebuild
Unlike mold-only specialty firms, we handle inspection, removal, and full reconstruction in-house. One team from start to finish, no coordination delays, no subcontractors.
Don't Let Mold Affect Your Family's Health
Augusta's Savannah River humidity creates persistent mold risk in historic and modern properties alike. Call now for professional remediation.
Common Causes of Mold in Augusta, GA
Augusta's Savannah River climate, historic housing stock, and long humid summers create above-average mold risk throughout the city.
Summerville and Olde Town Historic Construction
Augusta's Summerville and Olde Town neighborhoods contain homes built in the 19th and early 20th centuries with construction assemblies that predate modern vapor barriers — plaster walls on wood lath, brick foundations with no damp-proofing, and crawl spaces designed for ventilation rather than moisture control. These assemblies accumulate moisture from Augusta's humidity over decades in wall cavities and structural framing that is invisible to standard visual inspection.
Savannah River Basin Ambient Humidity
Augusta's position along the Savannah River means the city experiences higher ambient outdoor humidity than comparable inland Georgia cities. The river surface continuously evaporates moisture into the surrounding air, and Augusta's lower-elevation neighborhoods near the river see indoor humidity levels during the summer that exceed the 60 percent threshold where mold growth becomes possible even with functioning air conditioning.
Post-Flood Residual Moisture
Augusta and its surrounding neighborhoods have experienced Savannah River flooding events that left residual moisture in structures that was not professionally remediated. Water that appears to have dried from the surface often remains in wall cavities, subfloor assemblies, and under floor coverings for months after the visible water is gone. This long-term residual moisture supports ongoing mold growth in concealed locations that require professional moisture mapping to detect.
HVAC Condensate in High-Demand Climate
Augusta's climate requires residential air conditioning systems to run nearly continuously from April through October, producing consistent condensate loads on HVAC equipment. Drain line clogs, overflow pan failures, and evaporator coil condensation that migrates beyond the collection system are consistent mold triggers across all Augusta neighborhoods. Military housing adjacent to Fort Eisenhower is particularly prone to deferred HVAC maintenance that creates these conditions.
Fort Eisenhower Adjacent Housing Turnover
The residential communities surrounding Fort Eisenhower experience high tenant turnover associated with military reassignment cycles. Deferred maintenance, unreported water events, and HVAC neglect during occupancy gaps create conditions where mold establishes between tenants. Property managers and owners in these communities often discover mold during inspection periods between assignments, when the problem has had extended time to develop without occupant awareness.
Mold Remediation Coverage — Augusta and Richmond County
✓Augusta, GA
✓Summerville, GA
✓Forest Hills, GA
✓National Hills, GA
✓Olde Town, GA
✓Martinez, GA
✓Evans, GA
✓Grovetown, GA
Our Columbia office serves Augusta and Richmond County. Mitigation and remediation services only in Georgia. Call for same-day assessment. Call 888-742-3085
Mold Remediation FAQ — Augusta, GA
How do I know if I have mold in my Augusta home?
Common signs include musty odors, visible discoloration on walls or ceilings, water stains, unexplained allergic reactions, and condensation on windows. Augusta's humidity makes mold common — if you suspect mold, call for a professional inspection.
Is mold testing necessary before remediation?
We strongly recommend testing. Lab analysis identifies the mold species, concentration levels, and whether it's a health hazard. This information guides our remediation approach and provides documentation for insurance.
How long does mold remediation take?
Small, contained mold issues may take 1-3 days. Larger problems affecting multiple rooms or structural elements can take 1-2 weeks. We provide a detailed timeline after inspection.
Is mold remediation covered by insurance?
Coverage varies by policy and cause. Mold from a covered water damage event (like a burst pipe) is typically covered. Pre-existing or maintenance-related mold may not be. We help you navigate the claims process.
Can I stay in my home during mold remediation?
It depends on the extent and location. Small, contained projects may allow you to remain in unaffected areas. Larger projects may require temporary relocation. We discuss this during assessment.
How do you prevent mold from coming back?
We address the moisture source — repairing leaks, improving ventilation, installing dehumidifiers, or fixing drainage issues. Without addressing the cause, mold will return regardless of remediation quality.
How much does mold remediation cost in Augusta, SC?
Most residential mold jobs in Augusta run $1,500 to $6,000 depending on affected area size and contamination severity. A contained bathroom or closet typically costs $1,500 to $3,000. Larger infestations affecting multiple walls, ceilings, or HVAC systems can run $4,000 to $8,000 or more. We provide a written estimate after inspection — no surprises. Call 888-742-3085 for a free assessment.
Request Mold Remediation Service in Augusta
Fill out the form and our team will contact you immediately. For the fastest response, call us directly.
✓ Free damage assessment
✓ Insurance claims assistance
✓ On-site in under 1 hour
✓ IICRC certified technicians
Mold in Your Augusta Home? Call Now.
IICRC S520-certified remediation. Approximately 90 minutes from Columbia. Veteran-owned. Call 888-742-3085.